|
2-1/2
2
2
4
ar
|
c
t
c
c
|
Besan (1)
Salt
Water
Water (more)
Oil
|
Make: - (20 min + 1 hr to 8 hrs cooling time)
- Lightly oil a suitable mold. I use an 11 x 7 inch glass baking
dish.
- Place BESAN in a large mixing bowl, preferably through
a sifter. Whisk it around to make sure there are no lumps, then
mix in Salt and whisk some more.
- Stir in 2 cups Water and whisk it well to assure there
are not lumps at all.
- In a wide, heavy bottomed pot (I use a 5 quart tri-ply sauté
pan), bring 4 cups Water to a boil over fairly high flame.
With a flat spatula, stir constantly as you slowly mix in the
Besan mix. Lower the heat a little and keep stirring and
scraping up the bottom of the pan until the mixture is smooth
and has a silky appearance (about 5 minutes). It will start to
thicken immediately. I regulate the heat so I see just a couple
of bubbles at the end of the 5 minutes of stirring.
- Pour into the prepared mold and smooth out. This is best done
by two people, one to hold the pan, the other with a rubber spatula
scooting it out into the mold. Especially with our 2-1/2 cup formula
it's setting fast, so there's no room for delay.
- Set it aside to cool (don't put hot things in your fridge). When
pretty cool, slide it into the fridge to set. Don't cover with
plastic for awhile as it will exude some water at first.
- Turn out on your cutting board and cut as needed for your use.
|